Miva Merchant Modules and Applications Search

• Email to any of your drop-ship manufacturers listing the Ship To address and the products to be shipped if using real time creditcard authorization. The module will sort out which drop shippergets which emails, including listing the products to be shipped. Unlike some other vendors' drop ship notification modules, this one only includesthe products belonging to the associated drop shipper. Thus a drop shipper doesnot see the products being supplied to the customer by other drop shippers when the order contains multiple product sources. Youcan still use the module if you are not using real time authorization, but you would send the email to your pending mailbox until manual processingverified the charge, then forward to the drop shipper. This would savehand entering the order. In addition to the email, an archive flatfile is created which you can use to easily track sales activity related to each of your drop-ship manufacturers.
• Email to Ship To or Bill To or both thanking them for a donation to your sponsored charity on your site.
• Email to your shipping department listing Ship To addressand products ordered if using real time credit card authorization. Products section can be cut/folded to result in a shipping label with your company address included. If notusing real time authorization, use the pending mailbox technique similarto the drop shipper scenario above.
• Email a promo coupon code if a customer purchases a specificproduct or from a list of products
• Email service, warranty, shipping and contact information on specific products or product lines
• Send an email to your cell phone's inbox when orders are placed in your store (requires a cell phone plan that assigns an email address to your phone).
• You own a mall with multiple stores within the mall. Thosestore owners rent the stores from you for a percentage of their gross. Use mail manager as an audit tool to track theirsales. In addition to the autoresponse email, mail manager produces a flat file with order ID, date, product name, product code, quantity, price for each, and price extended. Periodically retrieve that flat file and import into a spreadsheetfor easy analysis.
• The included Mail Manager Report module can display the contents of that flat file through admin. It can filter the report by specific timeperiods (daily, weekly, monthly) within reason. The limits of your PC or server may prevent very lengthy reports for excessively long time periods. It can also limit the report to only one product code. Since the templates canbe designed for each vendor, you can create individual vendor flat files with a corresponding report for each vendor.
• Literally, you can have a different autoresponder for everyproduct in your store.

However, Mail Manager has a somewhat open architecture sothat other events can also trigger an automated response. For example:

• Send a welcome email before the order completes, but afterthe customer completes the registration process (for those thatcreate an account)
• Send a thank you for rating a product (using our Rate This system)along with a coupon code for taking the time to do so
• You can use the ifvar script or var token in these "other event" emails. For example, generate a unique coupon code with a module token and insert it in the welcome email to give the new customer an incentive to buy now.
• Use a render token to send an email from any page in the store. For example, put it on the product page to send a specific email when a specific product's page is viewed by a customer who is logged in. The email goes to their password recovery address (but could be bill to or ship to address). If you want it sent to a hard coded address, e.g. yours to monitor traffic,you would put your email address in the 3rd parameter of the token. The uses of this feature are endless. Send a coupon to entice customers to buy when they visit specific product screens. Tell them about other products related to the one they just viewed.

As you can see, the uses of this Mail Manager are quite diverse. Some of the variable features configured through admin for each template are:

• Show or hide any of the data elements
• Orient your email either horizontally or vertically
• There is also a free form template using an extensive list of tokens and mini-scripts to customize the emails that are sent at the time of order completion. They can vary from mimics of the standard merchant notification and customer confirmation emails to brief order notifications for better acceptance within cell phone emails. The emails can be plain text or HTML formattedemails for better readability. You can change the fonts, colors,layout and even add images to your confirmation and notificationemails. If your shipping and payment modules are configured withinvoice notices, these can be included in the emails with a token. You can include data from other 3rd party modules, like Addendum, by using tokens. You can also create packing slip and label emails with the "ship to" country address formatted according to the applicable country's postal recommendations when using the HTML template. In the free form template you canalso set the time so that it can be offset from the server time,thus display for a different time zone in each of your emails.
• Customize your email and store's physical address
• Designate email recipient, i.e. Ship To and/or Bill To and/or fixed email address
• List full or partial Ship To and/or Bill To address
• Restrict email to a specified order dollar value range, reward big spending customers with a coupon for their next visit
• Restrict email to a specified list of countries, thus allowing for language specific emails
• Resend order emails if the customer knows and enters the order number and email which match the actual order. The form for these two data elements can be placed anywhere you can edit the store user interface, e.g. headers, footers, welcome screen.
• You can specify the product code and an attribute/option value that must also be met before the email will be sent. This is particularly useful when the emails are used for vendor notification. A certain product might bedrop shipped by two different vendors and the only difference is the selected attribute/option value.
• Insert a "require" token that has to be met before the email will be allowed. As example,have a checkbox using Addendum to ask a customer if they want to be added to a list server (mailing list). Then if they check the box, the "yes" response is sent to Mail Manager. The Mail Manager can then generate a specifically formatted email to activate an email address at your list server, if you have one.
• Write a different body for each of the email templates you add
• List products and prices or just the products without prices
• Link the email usage to one or more product codes or entire inventory with wildcard
• No need to go to each product to link the email, a copy and paste froma flat text file will add hundreds instantly

I'd be surprised if you find that this capability exists anywhere in any mid-priced shopping cart system. Autoresponders that fill in the blanks are one thing, but this is a store owner, pre-planned autoresponse for a specific product. Within your store, you could have dozens of different responses (individual or grouped) or a wildcard response for all of the products. You can use itto make connections not directly related to sales, yetlinked to a specific sale.

• Customer buys a kayak from your store. Tell them about the kayak camp 20 miles from your store and give them the 800number of the guy with the info about a big get together next month.
• Customer buys an orchid from you which would lead you to believe he/she may have a specific variety you have been looking for. You autorespond with your want list for your nursery inhopes of finding the needle in a haystack.

As you can see, this list could be endless. Targetted, intelligent autoresponders are designed to increase your store'sbusiness and decrease the amount of time employees spend on sendingout product specific, emails.

The pre-formed templates are easy to configure and do not require programming experience. For the more experienced, you also have the option of using tokens and mini-scripts in free form templates. An example free form template is included with the install documents.

Price: $45.00 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: N/A Versions: 5.x+
Other Module Compatibility: N/A

From: Customer Management Support Modules
Relevance: 67.80%%

Rating: (0) Votes: (0) Hits: (1298) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Mail Manager v5 <-- Just click this link and then add to your favorites!

5 Mail Manager Weiland / Miva Central

The ultimate Miva Merchant autoresponder module - send specialized emails at the completion of the order. These emails are in addition to or in place of the standard emails which are sent at order completion, e.g. merchant notification, customer confirmation and even vendor specific notification.

Features: (some features are only in the compiled version)
- Autoresponder - specialized emails at the completion of the order
- Merchant notification and customer confirmation
- Vendor and product specific templates
- Include coupons or promo codes when specific products ordered
- Easy to use checkbox configuration of vertical or horizontal layout emails
- Highly configurable free form template layout emails with embedded tokens
- HTML or text email formatting
- Archive flat file is created for each template, easily track sales activity
- Mail Manager Report module can display the flat file contents by time period or product
- Ship to, bill to and other email addresses for each template
- Send emails to your company's internal departments, e.g. shipping
- Emails to web enabled cell phones
- Open architecture so that other events can also trigger an automated response
- Send a welcome email before the order completes and include a promo code
- Include 3rd party data with tokens, e.g. Addendum responses
- Display shipping and payment invoice messages
- Create packing slip and label emails
- Ship to country address formatted according to the applicable country's postal recommendations
- Restrict email to a specified order dollar value range, reward big spending customers with a coupon
- Restrict email to a specified list of countries, thus allowing for language specific emails
- MMUI and OpenUI compatible. No editing of the mmui.mv is needed and no OpenUI hook points are used

In admin, you create one or more template emails. Each template can be different, i.e. what it displays, how the data is oriented on the screen/paper, and what product(s) triggers the autoresponder. Most responses are triggered by the product codes purchased. Some example uses:

• Email to any of your drop-ship manufacturers listing the Ship To address and the products to be shipped if using real time credit card authorization. The module will sort out which drop shipper gets which emails, including listing the products to be shipped. You can still use the module if you are not using real time authorization, but you would send the email to your pending mailbox until manual processing verified the charge, then forward to the drop shipper. This would save hand entering the order. In addition to the email, an archive flat file is created which you can use to easily track sales activity related to each of your drop-ship manufacturers.
• Email to Ship To or Bill To or both thanking them for a donation to your sponsored charity on your site.
• Email to your shipping department listing Ship To address and products ordered if using real time credit card authorization. Products section can be torn/folded to result in a shipping label with your company address included. If not using real time authorization, use the pending mailbox technique similar to the drop shipper scenario above.
• Email a promo coupon code if a customer purchases a specific product or from a list of products
• Email service, warranty, shipping and contact information on specific products or product lines
• Send an email to your cell phone's text messaging when orders are placed in your store (requires a cell phone plan that assigns an email address to your phone)
• You own a mall with multiple stores within the mall. Those store owners rent the stores from you for a percentage of their gross. Use mail manager as an audit tool to track their sales. In addition to the autoresponse email, mail manager produces a flat file with order ID, date, product name, product code, quantity, price for each, and price extended. Periodically retrieve that flat file and import into a spreadsheet for easy analysis.
• With compiled Merchant, the included Mail Manager Report module can display the contents of that flat file through admin. It can filter the report by specific time periods (daily, weekly, monthly) within reason. The limits of your PC or server may prevent very lengthy reports for excessively long time periods. It can also limit the report to only one product code. Since the templates can be designed for each vendor, you can create individual vendor flat files with a corresponding report for each vendor.
• Literally, you can have a different autoresponder for every product in your store.

However, Mail Manager has a somewhat open architecture so that other events can also trigger an automated response. For example:

• Send a welcome email before the order completes, but after the customer completes the registration process (for those that create an account)
• Send a thank you for rating a product (using our Rate This system) along with a coupon code for taking the time to do so
• Essentially any event in the mmui, oui or even another third party module can trigger an email which you write for the particular event
• You can use the ifvar script or var token in these "other event" emails. For example, generate a unique coupon code with a module token and insert it in the welcome email to give the new customer an incentive to buy now. If you don't have an account with us yet, sign up and you'll see how it works.

As you can see, the uses of this Mail Manager are quite diverse. Some of the variable features configured through admin for each template are:

• Show or hide any of the data elements
• Orient your email either horizontally or vertically
• In the compiled version is a free form template using an extensive list of tokens and mini-scripts to customize the emails that are sent at the time of order completion. They can vary from mimics of the standard merchant notification and customer confirmation emails to brief order notifications for better acceptance within cell phone emails. The emails can be plain text or HTML formatted emails for better readability. You can change the fonts, colors, layout and even add images to your confirmation and notification emails. You can include data from other 3rd party modules, like Addendum, by using tokens. You can also create label emails with the "ship to" country address formatted according to the applicable country's postal recommendations when using the HTML template.
• Customize your email and store's physical address
• Designate email recipient, i.e. Ship To and/or Bill To and/or fixed email address
• List full or partial Ship To and/or Bill To address
• Restrict email to a specified order dollar value range, reward big spending customers with a coupon for their next visit
• Restrict email to a specified list of countries, thus allowing for language specific emails
• Write a different body for each of the email templates you add
• List products and prices or just the products without prices
• Link to one or more product codes or entire inventory with wildcard
• No need to go to each product to link the email, a copy and paste from a flat text file will add hundreds instantly

I'd be surprised if you find that this capability exists anywhere in any mid-priced shopping cart system. Autoresponders that fill in the blanks are one thing, but this is a store owner, pre-planned autoresponse for a specific product. Within your store, you could have dozens of different responses (individual or grouped) or a wildcard response for all of the products. You can use it to make connections not directly related to sales, yet linked to a specific sale.

• Customer buys a kayak from your store. Tell them about the kayak camp 20 miles from your store and give them the 800 number of the guy with the info about a big get together next month.
• Customer buys an orchid from you which would lead you to believe he/she may have a specific variety you have been looking for. You autorespond with your want list for your nursery in hopes of finding the needle in a haystack.

As you can see, this list could be endless. Targetted, intelligent autoresponders are designed to increase your store's business and decrease the amount of time employees spend on sending out product specific, followup emails.

MMUI and OpenUI compatible. No editing of the mmui.mv is needed and no OpenUI hook points are used. Thus, module conflict does not occur. The pre-formed templates are easy to configure and do not require programming experience. In the compiled version of Merchant (4.14 and newer), you also have the option of using tokens and mini-scripts in free form templates. An example free form template is included with the install documents.

Price: $45 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions: 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Customer Management Support Modules
Relevance: 65.21%%

Rating: (10.00) Votes: (1) Hits: (1930) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Mail Manager <-- Just click this link and then add to your favorites!

6 Static Catalog Generator Weiland / Emporium Plus

The StatCat module is both an admin module and a basket interface module. The primary purpose of StatCat is to generate static catalog pages (indexes and sub-pages) directly from your Miva Merchant products and category databases so that search engines will add your pages to their index. Presumably this will allow customers to find your store amongst the millions of web sites on the Internet. As such, the pages generated are basic html pages with links to sub-pages, basket page and individual product pages in your Miva Merchant system. Each page contains your store title, meta description, meta keywords, footers along with the products. Category pages also contain category headers and footers.

Although these are static html pages, they have direct links which allow customers to add the products to their basket which is maintained in your Miva Merchant shopping cart system. If you are using the CIM Inventory Manager or Miva Corp's new Inventory Manager (in Merchant 4.x), it will even check the stock level and return an out of stock message if stock level is depleted

** Caution: If you are using Merchant 4.0 and its Inventory Management system that deducts products from inventory when they are placed in the basket, you should select to NOT use the Add to Basket buttons if you have one-of-a-kind items. The reason for this is that some robots and other indexing software may even follow links which contain the ? and & characters. This could result in the stock level decrementing to zero and out-of-stock emails being sent. The products won't be removed from inventory completely, as they will be re-stocked when you run the Admin:Delete Expired Shopping Baskets. This undesirable situation does not exist in Merchant versions 2.x or 3.x. It is also not a problem in Merchant 4.x if your store does not use the Miva Corp Inventory Management or your product stock levels are not likely to be depleted with one or two passes of the indexing program.

The store owner determines which page the customer will go to when they select to add a product to the basket. They can be taken either to the basket for review or back to the static page they just selected from. Both processes are automatic and do not require Javascript or meta refresh routines. Either click through destination can be used on either of the sort options, store owner choice. In addition to the functionality of this module, it provides an excellent example of how to interface static pages with the Miva Merchant system with return to the correct static page.

Quick links on each sub-page allow the customer to return to the index or go straight to their basket for review and checkout.

Below the sub-pages the store owner can even generate individual product pages. These product pages contain the full sized image and description. If the store uses the Flexible Product Description module and the product record contains a Keyword field, those product specific keywords are added to the store's generic keywords which are already in all of the static pages.

The store owner can decide whether to display the price for each item on the static pages. Since these pages are static and cannot function interactively to determine customer price groups or discounts, the hide price routine has its place. However, if the store has no price groups and discounts are calculated on basket totals or discount coupons, the price listing is useful.

The static pages also have no way to restrict access. So if your store is one which does not allow certain products to be shown to all customers, then this module is not for you, unless you can place all of those restricted products in specific categories. In which case, you could then sort pages by category and simply delete those categories' pages.

This module is for Miva Merchant 2.x, 3.x and 4.x. It works with both the Miva Merchant look and feel (mmui.mv) and the OpenUI look and feel (oui.mv). If using the mmui.mv, there are two edits that need to be made to the mmui.mv file.

StatCat produces pages similar (mirror) to the layout in Miva Merchant with admin control. The following configuration settings are made within the standard Miva Merchant admin interface: Page title, home URL, optional title/store logo, title background color, title foreground color, category title header size, number of product columns on the category sort page, Meta description of the site, Meta keywords on the site, return action after adding a product to the basket, option to hide the prices, category column background color, category column foreground color, category column font, category column size, product background color in the category sorted pages, product foreground color in the category sorted pages, product font and size in the category sorted pages, optional display of thumbnail images in the category sorted pages, store front page welcome screen, search button input, product descriptions on category pages, and page footer.

Once generated, the index pages can be linked to your main home page. The catalog can be left in the directory it is generated in or copied to any web site (or multiple web sites) to increase search engine visibility. The links to images and back to your Merchant.mv store will work across servers. An example of this remote distribution can be seen at my Yahoo/Simplenet web site. The limitation to the remote distribution is that these remote static pages are one way, ie. placing a product in the basket will take the customer to the main Merchant.mv, but not back to the remote static page. They would then continue shopping in Merchant.mv. This limitation exists only if the static pages are not in their original catalog directory. If they are in the catalog directory on the local server with Merchant.mv, then return to the static pages is one of your options in admin.

The StatCat also has the ability to generate static pages which can be placed on a disk and used as a catalog which can be mailed or given out to potential customers. When using this option, links to your web site or the shopping cart are suppressed. An example of this type of catalog can be seen online. It has no links to the cart and the images are virtual to the static html pages.

When generating the catalog, the store owner has the option of restricting the html output to a list of specific categories. This is particularly useful when the store owner wants to place their static pages on remote servers which have specific themes in a mall environment. Some categories may "fit in" and some may not. This also might be useful if you want to create disks with only certain categories of products on them to be given to customers.

Note 1: StatCat uses the first letter of the product name to name the sub-pages. If you use illegal characters for the first letter of product names, you will not be able to generate the by-name catalog. An example would be the left bracket, as some might have put the font tag at the beginning of the product name. If that is the case, use the by-category catalog.

Note 2: If you have an excessively large products database, you will probably not be able to run StatCat on a server without timing out. However, you should be able to run it in MivaMia if you have a mirror of your store on your PC. You would then need to upload the static pages manually. This store of 600 products took about 5 seconds to generate the category pages.

Example static catalog pages

• Sort by name
  • This example has the add to basket button disabled
  • This example contains StatCat generated individual product pages
• Sort by category
  • Click through returns to the originating static page after addition (alternatively you can have it remain at the merchant.mv basket)
  • This example contains StatCat generated individual product pages

Several new features have been added to the compiled version; background image, functional navigation bar, "smart" metatags, extensive implementation of keyword and header and footer usage, product page names can be product code or name ending with html, inclusion of product links at the top or bottom listed as featured products or similar designation, include any fields in the products database on product pages (including modified structure), optionally hide subcategories on category pages as applicable, additional product page links such as "check availability or latest prices", and export to any directory within the store's path (creates directory if it does not exist). Discontinued (inactive) products can continue to have modified static pages generated so that search engine links remain viable, yet do not result in errors when linked to the store. Additionally, affiliate codes can be included with every link so that the static catalog pages can be given to affiliates who wish to mirror your catalog at their site. If you are using the OpenUI, StatCat adds "smart" metatags to your merchant.mv so that when the customers (and search engines) click from your static pages to your actual store, the pages will contain metatags related to category headers, product descriptions and product keywords (if used). It also reverses the title tag with the category and product screens so that the category or product name appear first, then the store name. If your store has our Volume Pricing module version (4.53 or higher) installed, StatCat can optionally include the volume price table on the static pages. When creating the static product pages, a flat file is created in the background which can be used for a data feed file for submission to Froogle^TM. It contains the header and data for the basic file format.

Price: $35 Upgrade Cost: $10 Upgrade Terms (If Any): Upgrade Now
Compatibility: MMUI/OpenUI Versions: 2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Search Engine Optimization Modules
Relevance: 61.48%%

Rating: (0.00) Votes: (0) Hits: (2294) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Static Catalog Generator <-- Just click this link and then add to your favorites!

7 Store Registry Sebenza Studios / Miva Central

Give your customers the abilty to create and maintain a registry or wish list at your store. They can create, update, delete, and email their registry to friends and family.

Key Features Include:

• Admin listing of all active registries. These registries can be viewed and deleted from the admin panel.



• Registry Search allows your customers to search for friends and family member registries.



• Registry owner can add, delete, and update all products within their list.



• Registry can be emailed to friends and family through a convienent link.



• All display settings are template based giving you full control over the look and feel of your stores registry.



• Expiration can be set to delete products within registries after the specified amount of days.



• Option to reduce quantities as list items are purchased.



• Option to delete list items when quantity reaches zero.



• Registry owners can opt to add a note to each product that will be viewable to purchaser.

Price: $69.95 Upgrade Cost: $44.95 Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions: 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Gift Wish Favorites List Modules
Relevance: 59.69%%

Rating: (6.00) Votes: (2) Hits: (1632) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Store Registry <-- Just click this link and then add to your favorites!

8 NetPush Advanced Inventory NetPush / MvCool

The NetPush Advanced Inventory Module allows Miva Merchant store owners to track inventory within Miva Merchant all the way down to the attribute/option level. The module has numerous configuration settings that should allow the admin to display and track any simple or complex inventory configuration. Inventory levels are only adjusted at checkout time so there is no need to worry about old baskets causing inventory problems. The module comes with an import and export module that allows administrators to easily update inventory levels by using csv files.

We suggest using template modules like Viking Coder's Product Templates and Category Templates if you want better control of the look and feel of your pages with regards to inventory. This will allow you to use tokens for display. Otherwise, you will have to settle for built in hook point displays that are built into the module and are configurable through the administration area.

The Advanced Inventory Module will send email when stock goes below certain configurable low stock level and can disable products when stock goes below the out of stock level. Administrators can also customize every message shown to the user. Fine grain customizations are made easy because the module allows product level configuration settings the ability to override global inventory configuration settings. This allows Miva Merchant Administrators the ability to customize inventory configurations for every product, if he or she wishes.

Notes:

• OpenUI Tokens
  This module can be used with OUI OpenTokens. To use the module with Viking Coders template modules, see the OpenToken instructions and examples in the documentation on the NetPush.com site.
  
  
• Product Upsell
  This module does not show stock information on the product upsell screens at this time. Stock is still tracked in the basket and checkout, but no current stock level is shown on the upsell screens during checkout unless you are using alternatives like tokens in templates.
  
  
• Basket Redirect and Error Message
  The user is automatically redirected to the basket screen if he or she adds items to the basket that makes the product go out of stock or if the product is already out of stock. The error message is shown above the basket screen using a hook point in the Open UI. The message is configurable in the admin area.
  
  
• Checkout Screen Error
  If configuration is setup to do so, the module will block a user from checking out if their basket has an item that is out of stock. This message is shown automatically at the top of the screen. The message is configurable in the admin area.
  
  
• Pipes ( | )
  Product codes, attribute codes, and option codes must not contain the pipe character. NetPush Advanced Inventory uses the pipe to delimit for lookups. Pipes in your codes will cause the module not to work correctly.

Requirements:

• Open UI 4.723+
  This module requires that you have OpenUI installed in your store. The module uses hook points in the OpenUI. You must have OpenUI version 4.723 or higher if you plan to use the OpenToken functionality available in this module. Please see the OpenUIsite for information about latest versions and bug fixes.
  
  
• Miva Empressa 3.96+
  This module requires that you have Miva Empressa 3.96 or higher. The module uses functionality that is only available in newer versions of the Empressa Engine. Miva regularly releases new versions of Miva Empressa and the Virtual Machine to add new functionality and fix bugs. If you are on an older version, consider contacting your hosting company. You can find the Miva Empressa version at the top left hand of your Store Administrator when you first login. It should show your Miva Merchant version and your Miva Empressa version.
  
  
• Miva Merchant 2.x, 3.x, and 4.x
  This module should work with most versions of Miva Merchant. In order to use the deactivate product option, you must be on version 3.0+. All testing and development was done on versions 4.13+.
  

Global Configuration Screen

All inventory settings will use the global configuration settings found in the Miva Merchant Administration area under Stores > Your Store > System Extension Configuration > NetPush Advanced Inventory. One may override these settings for products (see product level settings below). Each product must also be manually turned on before tracking starts. See product settings below.

Configuration Settings

• Use NetPush Inventory
  You must set this to "Yes" if you want the module to be turned on. If this is set to "No", the module will not do anything.
  
• Amount considered out of stock
  Usually this would be 0, but it can be set to any number, including negative numbers. Once the stock level reaches this number, it will be considered out of stock.
  
• Deactivate when product level is out of stock
  In Miva Merchant versions that support it, the module will turn the Active flag for a product to off, if the product reaches the out of stock level. This only works on the product level, not for the attribute/option level.
  
• Allow purchase even after out of stock
  Turning this on will allow customers to purchase products even after they go below the out of stock level. This could be a backorder situation.
  
• Automatically remove from basket
  When a user adds products to the basket, the products will be removed if it makes the inventory go below the out of stock level and the admin is not allowing purchases when products are out of stock. Please take note that this option could cause problems if other modules are installed that also act on the basket.
  
• Send Low Inventory Notices
  Turn this on to receive email warnings when inventory goes below the low inventory level.
  
• Amount considered low
  The level that is considered low. Use this setting to trigger emails that will warn you when inventory is hitting a low level.
  
• Low Email To Address
  Set this to the email address of the person who should be receiving emails when stock is at a low level.
  
• Low Email From Address
  Set this to the email address that should be set as the from address in low stock emails.
  
• Low Email Subject
  The subject of the low stock email. This field has token replacement.*
  
• Low Email Body
  This is the body of the low stock email. This field has token replacement.*
  
• Automatically change stock levels
  Turn this on if you want the system to subtract stock when a user purchases. If this is set to "No", the system will not update stock levels.
  
• Show out of stock messages
  Turn this on to show out of stock messages on the product page when stock goes below the out of stock level.
  
• Show in stock messages
  Turn this on to show how much stock is left on the product page.
  

  Out of Stock Messages*

• Product Level
  This message is shown to the user on the product page below the shipping weight.
  
• Attribute Level - Checkbox
  This message is shown to the user on the product page next to a checkbox option.
  
• Attribute Level - Radio Buttons
  This message is shown to the user on the product page next to each radio button option.
  
• Attribute Level - Select Box
  This message is shown inside of the drop down on a select box. HTML should not be used here.
  

  In Stock Messages*

• Product Level
  This message is shown to the user on the product page below the shipping weight.
  
• Attribute Level - Checkbox
  This message is shown to the user on the product page next to a checkbox option.
  
• Attribute Level - Radio Buttons
  This message is shown to the user on the product page next to each radio button option.
  
• Attribute Level - Select Box
  This message is shown inside of the drop down on a select box. HTML should not be used here.
  

  Other Messages*

• Out of Stock - Basket Line Marker
  This helps the user to see which products have gone out of stock when looking at the basket. A red asterisks may be a good indicator for the user.
  
• Out of Stock - Basket
  This message is shown to the user above the basket when a product has gone out of stock when adding, updating, or looking at the basket. Products can go out of stock at anytime, even after a user adds it to their basket. This is because stock levels only change after checkout.
  
• Out of Stock - Checkout
  This message is similar to the out of stock basket message. It is shown on the payment screen during checkout. This should be considered one final inventory check before allowing the user to purchase.

* Token Replacement
This module has a few built in tokens for messages that allow you to give yourself and the user more detailed information. Some of the tokens below can only be used on certain screens, or in emails.

%%stock%% - Displays the current stock level. (1,2,3)
%%basket_quantity%% - Displays the amount in the basket and is unlikely to be used. (1,2)
%%available%% - Displays the amount of stock left before hitting the out of stock level. (1,2,3)
%%oos_level%% - Displays the out of stock level. (1,2,3)
%%line_items%% - Displays a list of line items that are effected. (1,2)
%%product_id%% - Displays the product id. (1,2,3)
'%%product_code%% - Displays the product code. (1,2,3)
%%product_name%% - Displays the product name if available. (3)
%%attribute_code%% - Displays the attribute code, or None if the effected product is only being tracked at the product level. (1,2)
%%option_code%% - Displays the option code, or None if the affected product is only being tracked at the product level. (1,2)

1. Is used for the low stock email body and subject
2. Is used for the out of stock basket message and out of stock checkout message
3. Is used for the in stock and out of stock messages on the product pages.

Product Configuration Screen

All inventory settings will use the global configuration settings found in the Miva Merchant Administration area under Stores > Your Store > System Extension Configuration > NetPush Advanced Inventory. To override these settings at the product level, go to the product in the administration area and click on "NetPush Advanced Inventory". You will see the settings below.

Configuration Settings

• Use NP Inventory on this Product
  You must set this to "Yes" if you want to track inventory on the product. You must manually set this to "Yes" for every product that you want to track. If this is not set to "Yes", no inventory tracking will take place. By default, no product is tracked.
  
• Override Global Settings
  If this is set to "Yes" the configurations settings will be taken from the individual product screen instead of from the Global configuration settings found under under system extension configuration. If set to "No", the module will use the global settings from above when doing inventory for the product. The default is to use the global settings.
  
• Amount considered out of stock
  Overrides same setting under Global Configuration.
  
• Deactivate when product level is out of stock
  Overrides same setting under Global Configuration.
  
• Allow purchase even after out of stock
  Overrides same setting under Global Configuration.
  
• Automatically remove from basket
  Overrides same setting under Global Configuration.
  
• Send Low Inventory Notices
  Overrides same setting under Global Configuration.
  
• Amount considered low
  Overrides same setting under Global Configuration.
  
• Low Email To Address
  Overrides same setting under Global Configuration.
  
• Low Email From Address
  Overrides same setting under Global Configuration.
  
• Low Email Subject
  Overrides same setting under Global Configuration.
  
• Low Email Body
  Overrides same setting under Global Configuration.
  
• Automatically change stock levels
  Overrides same setting under Global Configuration.
  
• Show out of stock messages
  Overrides same setting under Global Configuration.
  
• Show in stock messages
  Overrides same setting under Global Configuration.
  

  Out of Stock Messages*

• Product Level
  Overrides same setting under Global Configuration.
  
• Attribute Level - Checkbox
  Overrides same setting under Global Configuration.
  
• Attribute Level - Radio Buttons
  Overrides same setting under Global Configuration.
  
• Attribute Level - Select Box
  Overrides same setting under Global Configuration.
  

  In Stock Messages*

• Product Level
  Overrides same setting under Global Configuration.
  
• Attribute Level - Checkbox
  Overrides same setting under Global Configuration.
  
• Attribute Level - Radio Buttons
  Overrides same setting under Global Configuration.
  
• Attribute Level - Select Box
  Overrides same setting under Global Configuration.
  

  Other Messages*

• Out of Stock - Basket Line Marker
  Overrides same setting under Global Configuration.
  
• Out of Stock - Basket
  Overrides same setting under Global Configuration.
  
• Out of Stock - Checkout
  Overrides same setting under Global Configuration.

Setting Product Inventory Levels

The administrator can set product inventory levels by going to the product page within the Miva Merchant admin area and clicking on NetPush Advanced Inventory. This is the same screen as the product level configuration. Product inventory levels are shown below the configuration area. To add new inventory, use the yellow add button. To edit inventory, click white add button next to the inventory entry.

The module checks inventory by looking at a unique combination of Product Code, Attribute Code, and Option Code. When entering stock levels, you enter the codes separated by a pipe. For example, shirt1|color|red, where shirt1 is the product code, color is the attribute code, and red is the option code. If you do not set an inventory level for an existing product attribute combination, no tracking is done. Setting a stock level of -9999 has the same effect.

Inventory at a product level
You may choose to only track inventory at a product level in combination with or not at an attribute level. To enter a stock level for a product, simply use prodcode||. This tells the system that you are tracking the product code, but not the attributes or options by leaving them blank. Using -9999 for a stock level will temporarily turn inventory tracking off.

Inventory at the attribute level (checkbox, select box, radio buttons)
Checkbox - prodcode|attrcode|(the last field should be left blank, as checkboxes have no options)
Select Box and Radio Buttons - prodcode|attrcode|optcodeAll 3 are required and must be unique, even if you are using attribute templates. If you are using normal templates in combination with attribute templates, make sure you do not give them duplicate code names.

Using Advanced Inventory with Template Modules and OpenTokens

The Advanced Inventory Module can be used with 3rd party template modules like the ones from Viking Coders by using Open UI tokens on product pages to display current inventory levels. Please note that token support has not been completely tested as of yet.

%module|npinventory|stock_level%
Returns the stock level for the product, attribute, option combination. To ensure that this works correctly, you should set g.NPI_Product_Code, g.NPI_Attribute_Code, and g.NPI_Option_Code to the current product code, attribute code, and option code. On a checkbox, make sure to set g.NPI_Option_Code = ''. On a product level, make sure to set the attribute and option variables to ''. After these globals are set, call the token. If the return value is -9999, the item is not being tracked.

%module|npinventory|stock_available%
Same as above but shows the amount available.

%module|npinventory|oos_level%
Same as above but shows the out of stock level.

%module|npinventory|stock_list%
This token will set a global variable that contains an array of structures. You must set g.NPI_Product_Code equal to the current product code before calling the token. This array contains all of the product code, attribute code, and option code combinations for a specific product. It also contains the available stock, out of stock level, and other information shown below. This token makes it easy to create a stock table using OpenUI tokens in Viking Coders templates or in a product header or footer. Code examples are available in the help pages on the NetPush.com site.
Array Structure:
g.NP_Inventory_StockList[i]:attribute_code - Attribute Code
g.NP_Inventory_StockList[i]:option_code - Option Code
g.NP_Inventory_StockList[i]:stock_level - Stock Level
g.NP_Inventory_StockList[i]:oos_level - Out of stock level
g.NP_Inventory_StockList[i]:available - Stock Level minus out of stock level
g.NP_Inventory_StockList[i]:allow_pur - Allow purchases even if out of stock from admin settings
g.NP_Inventory_StockList[i]:low_amount - Low amount from admin settings
g.NP_Inventory_StockListLen - Variable that tells you how many items are in the array (represented by i above)

Price: $149 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Inventory Modules
Relevance: 59.45%%

Rating: (0.00) Votes: (0) Hits: (2001) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark NetPush Advanced Inventory <-- Just click this link and then add to your favorites!

9 Wait List Manager Weiland / Miva Central

Customers can identify products that they would like to purchase but are currently out of stock. Once you place the product in stock, you can run the Send Email routine from the admin interface. It sends an unlimited number of notifications as one process, using Miva Engine functions to prevent timeout. Each waiting customer will receive an email telling them that the product is back in stock.

If you are using my Inventory Management (IM) module (version 2.x or 3.x) or Miva's Inventory Management (version 4.x), the wait list manager will automatically insert the Wait List link on the product page when the quantity is zero or less (version 2.x or 3.x) or out of stock (version 4.x configurable on a product by product basis). If you have modified your IM (version 2.x or 3.x) to allow ordering at less than zero to a specified lower amount, you can modify the Wait List Manager to account for that. In 4.x, this is determined by the global default or individual product's "out" setting. You can even block the automatic link insertion by including the product code in the blocking list through the admin interface. If you are not using an Inventory Management module, you can still use the Wait List Manager by manually inserting the link into the product description of products you want to "Wait List". In the case of "other" inventory management systems, you can insert the link into the code that those systems generate for out-of-stock messages.

When the customer clicks the Wait List link they are taken to a form to verify/enter their email address. If they are logged in, it inserts their email address for them. If not, they just type it in. The form also lists the number of other customers waiting for the item if that number is 5 or above (just to the right of the product name). This will give customers a sense of urgency when they receive the in-stock notification. When they add themselves to the list, you have the option (in admin) of sending them a thank you (for their interest) email. If you employ this option, it will also tell them their position on the Wait List. When products are in short supply, that may be something your customers would like to know. Also, if they are already on the Wait List, and sign up again, it will not duplicate their record, rather it will email them that they are already on the list and what their current position is on the list.

The admin configuration screen allows you to vary the name and/or image associated with this program so you aren't locked into the term "Wait List". You can also change the colors and fonts in the form along with the verbage in the form and notification email. You may even want to pass on a coupon code in the notification email for customers who have been waiting for a product.

When editing an individual product in admin, you can also display all of the Wait List records associated with that product. They can be deleted manually in this screen if you don't plan to restock the item. There is also a handy link for mailing them to verify their continued interest in the item. For those not using an Inventory Management, this is also the screen that allows you to use Wait List to notify customers when an item is re-stocked. The Inventory Override works with either no online inventory system or inventory systems from other 3rd party module providers. Naturally, it also works with mine (version 2.x and 3.x) and Miva's (version 4.x) inventory systems. You can even limit the notification in this screen to just some of the waiting customers. This is useful when you only receive a small number of the out-of-stock item and there are many more waiting for it. Since the entries are arranged in order, it is easy to give those on the waiting list the longest, the first shot at the newly re-stocked item.

You can quickly get a summary of all of the items on "Wait List" to provide you with a re-order, based on demand, tool.

When you Send Email, the module searches all products with a stock level (if using mine or Miva's Inventory Management systems) above zero and checks the product code against the Wait List database. Pending Wait List customers are notified of the re-stock of the product and their Wait List record is then deleted.

This module works with both the Miva Merchant and OpenUI look and feel user interfaces. Minor editing is required if you are not using the OpenUI.

To help the store owner identify needs quickly, an optional CC email can be sent when an item is wait listed.

In the compiled version, you can use this module with the standard MMUI, as mmui.mv edits are not required in Merchant versions 4.14 and newer.

New in the compiled version is an alternate template form for the customer to enter their name and email address. This template can be HTML customized to suit your look and feel. If you are not skilled at coding HTML, you can still use the default (built in) form which is customized with colors, fonts, etc with easy inputs in admin.

The compiled version of this module can use OpenTokens instead of hook points within OpenObjects. The OpenDesigner screen lists the OpenObjects which can replace all or some screens within the OpenUI user interface. The OpenObjects provide a template screen which contains the existing hook points (backward compatibility), OpenToken capability, and the ability to move output around within the OpenObject screen. Since the tokens in this module conform to OpenToken functionality, they may be used in other template type screens like those provided by Viking Coders. Place the wait list button on the Merchant pages so that it better fits your desired look.

Version 2.x, 3.x Available

Price: $25 Upgrade Cost: $15 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Coming Soon Wait List Modules
Relevance: 55.39%%

Rating: (0.00) Votes: (0) Hits: (1884) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Wait List Manager <-- Just click this link and then add to your favorites!

10 Addendum v5 Emporium Plus / Miva Central

The admin interface allows you to build the form withyour store's questions using standard html syntax. Hence,you can make the response collection table match the restof your store's look and feel. You can have text, radio, select drop down list, text area, and checkbox inputs designed the way you want them. Add css if you like or use typical fonts and table tags.

You can place the questions on one of the three checkout screens. You simply add the tokens to the page templates per the install doc.

You can also specify one or moreof the questions to be required. Customers will not be able to completethe checkout if they do not respond to the required questions.

You can purge old questions from the active file and place them in ahistorical file in order to improve response time during order batchprocessing retrieval. The optional order batch retrieval uses the modified core batch report which is included in the zip distribution file.

You can limit the display of Addendumquestions based on specific product codes. If you list productcodes in the admin input, the questions will only be displayedif one of those products is in the basket at checkout. Youcan also use the wild card product code like 1AA*. If theapplicable products all begin with the same characters, youcan use the asterisk. This can only be used for the beginningcharacters in the product codes.

You can alsolimit the display of questions to specific ship to countries.

You can optionally includethe questions in the emails along with the responses by using the modified email modules which are included in the zip distribution file.If using our Mail Manager (sold separately) module you can have a question (checkbox) which will trigger a specific email, e.g. opt-in mailinglist signup. You can also include the questions and responseson the invoice (last page after payment completes). Theresponses for the batch report are retrieved from an indexeddatabase for faster access.

You can alsoattach a fee to a specific answer to one question if youplace the questions on either the customer information orshipping/payment selection screens.

The included Addendum View report featureallows you to search (within admin) the addendum filefor specific responses. For example, you might have a questionfor a specific requested shipping date. Simply search the filefor orders which have requested the delayed shipping for thatdate. The order numbers can be returned and fed into our EZ Batchreport (sold separately) for a tailored report for a specific shipping date. Another popular use of Addendum is to collect the salesman or representativecode with an order. Not only can you display the code in the batch report,but if you use Addendum View to create a list of orders attributed to thatsalesman, you can make a batch printout for each salesmanwith only their orders on it if you are using our EZ Batch Report (sold separately). You can also include the Addendum responses in the order export file that EZ Batch creates.

Limitation: When used in a store which uses PayFlowlink, PayPal or iTransact payment systems, you will need to placeyour questions on either the customer information screenor the shipping and payment selection screen. Thosepayment systems transport the customer to another domain.Hence, the module needs to save the responses to a filebefore the customer is transported off-site. When thecustomer returns from the off-site payment screens backto your store, the responses will be retrieved for savingto flat file or display in your merchant notification email.

The included modified merchant email and batch reports will display the Addendum resposes. Additionally, the batch report can provide page breaks between each order for better printouts (incoices). Also, the merchant notification email allows you to insert tokens in the subject line so you can include things like the order number, order total, and customer name in the subject of the email.

Compare this module with our competitors' pro or advanced or ultimate versions. Those are just words tacked onto a module name. Don't let our low price fool you - compare features and you will find this module probably contains all of the features found in theirs plus we have several additional features. The Addendum module has been in use since Merchant version 1.x and continually enhanced with each version. Our competitors will try to keep up, but the simple choice is, why get a shadow when you can get the "original".

The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed.

Price: $39.95 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: N/A Versions: 5.x+
Other Module Compatibility: N/A

From: Addendum Additional Info Modules
Relevance: 54.99%%

Rating: (0) Votes: (0) Hits: (1265) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Addendum v5 <-- Just click this link and then add to your favorites!

11 Coupon Redemption Weiland / Miva Central

Manage coupon addition and redemption functions within a Miva Merchant 2.2x, 3.x or 4.x storefront with this plugin module. License is for ONE mall. Within that single mall, it can be used in multiple stores without additional license.

Features: (some features are only in the compiled version)
- Configurable prompt
- Configurable action
- Configurable redemption
- Configurable coupon rejection messages
- OpenTokens for use in OpenObjects
- Searchable coupon database with pagination
- Easy view admin for coupon content and historical usage
- Coupon codes can be individually assigned
- Import coupon codes from flat file in bulk
- Autogenerate coupon codes with token
- Assign coupon code as a series for affiliate purposes
- Global scope or for specific products
- Checkout coupons one per order
- Instant coupons on product pages, multiple per order
- Fixed amount or percentage of eligible products discounting
- Specific product eligibility can be scoped to the attribute level
- Minimum order level for redemption
- Establish expiration dates
- Line item display in basket after redemption
- Single use coupons
- One per customer coupons
- Multiuse coupons (can be limited)
- Free shipping coupons
- Limit the country, state or zip a coupon can be used for
- Combination of free shipping and order discount (% or fixed) coupon
- Easy deletion of expired coupons
- Coupon report identifies coupon usage

Feature Details. You can add coupons through the standard Miva Merchant admin interface and include usage criteria.

• An unlimited number of coupons can be assigned to the store and each identified with a coupon code. Once you have added the module to the store, you can add coupons in the Order Fulfillment section of the admin interface. When you select the Add icon, you will have several input fields to fill in. You must enter a unique code for your coupon. This is the code that you will give to customers so they can shop and redeem the coupon (one per order). It can be any combination of letters and/or numbers.
• The compiled version has a coupon generation function. You can embed a token in your welcome email or notification emails generated with our Mail Manager module. A unique coupon code will be created and is based on the coupon template you designate. You can have an unlimited number of templates and an unlimited number of coupons copied from them. If you are not using our Mail Manager, you can still activate the generator by placing the token in the invoice header if you are using the OpenUI.
• If you have a lot of coupons you want to load into the system quickly, the compiled version has a coupon import from flat file module
• An optional expiration date can be included which will prevent its use if the date has passed. Enter it in the year, month, day format, eg. 20000724 would be July 24, 2000. If you leave this field blank the coupon will never expire. However, you can still delete it manually through the admin interface.
• A fixed value OR percentage discount off the order total is assigned to each coupon. The default is fixed value/price, eg $5.00 off the order total. If you put the % sign in the next input field AFTER the value field, it will calculate the coupon value based on the assigned percent of the order total. The %, if used, is entered in the separate field to the right for that purpose. If left blank, the calculation will be based on the fixed value of the coupon. See the note below about restricting discount calculations to specific products instead of the order total. A maximum redemption value can be assigned to each coupon in Merchant 4.x. If you enter the letter S in the field to the right, the coupon will be used to allow free shipping (compiled version only) for the entire order. Other criteria for the coupon must be met, e.g. minimum order amount, eligible products, etc.
• Optionally, a coupon can be allowed only when an order total reaches a specific amount. For example, you can give a 10% discount when the order total reaches $200 as an incentive or promo. In all cases where a raw value is used, you must make this value equal to or greater than the value of the coupon. If you use the percent calculation, this value can be any value, including zero.
• Based on your state's tax requirements, the coupon can be designated to reduce the sales tax or not reduce it. The coupon's tax effect is on the order total, not on individual products. For example, in some states, a store coupon reduces the cumulative value of products purchased before the sales tax is applied, hence you would want it to reduce tax. The exception to doing this is if your products are likely to be non-taxable, making a coupon reduce tax could result in a negative tax calculation. Another type coupon might be the manufacturer coupon. In some states, manufacturer coupons do not decrease the tax liability. You should determine your state's tax requirements before adding coupons to your store.
• Coupons can either be used:
  • multiple times - The coupon can be used at every visit by any customer who shops at your store. This is usually used as a promo to customers, user lists, clubs, etc. They often have a short expiration date to limit their use. A typical usage might be a special holiday sale, eg 10% off everything in the store if used by a specified date. This would eliminate the need for special price groups if the intent is that everybody who has the coupon code can use it.
  • only one time for each customer - The coupon can only be used for one visit per customer. When the same customer shops at your store a second time, if he/she uses the same coupon code, it will be rejected. This is probably the most common coupon and is usually used in print ads or as a promo, eg. "$5.00 off on your next visit".
  • only one time for a unique coupon code - The coupon can only be used once. Once any customer has used this code, it becomes unavailable for any other purchase. This is often used as a customer relations tool, eg "sorry for the inconvenience, please accept this coupon.....".
• You can restrict usage of a coupon in your store so that it can be used only if a specific product code is ordered. You can list several product codes, any of which in the basket would make the coupon valid if the other requirements are met. Leaving the product code blank means that customers do not have to order a specific product as long as they meet the other requirements the store owner has specified. If you check the box to the left of the product code list AND are using the percentage discount, only those products in the code list will be used in the calculation using the qualifying products subtotal. If you do not check the box, the percentage discount will be applied against the order total. In Merchant 4.0, you can use a wildcard for the product list, e.g. 1AA* would make all products beginning with 1AA eligible for the coupon discount.
• New in the compiled version of the coupon module is the ability to restrict the coupon usage down to the attribute level. For example, you can limit the coupon to product codes beginning with 1AA and the attribute "Version" with the option of "4.5". The format for the input would be 1AA*~Version~4.5|
• Alternatively, if you precede the product list with a - (minus) character, the coupon will be excluded from use with those product codes. You canNOT specify it to the attribute level like the include above. (compiled version only)
• Appropriate error messages are displayed when coupons don't meet the usage criteria established by the store owner. When the shopper enters a coupon code at checkout that is not valid based on the criteria you establish, he/she will see an error message just below the coupon code input when the checkout form is re-displayed. One coupon can be redeemed per order on the checkout page.
• In admin, the coupons can be easily displayed and edited. The coupons are displayed in a table format with configurable number of coupons per page displayed. The entire coupon database is searchable by coupon code or portion of the coupon code.
• Expired coupons can be removed from the database (to cut down on disk usage) one at a time or in mass. In admin, you can either put a check in the remove column and select update or select purge expired coupons, then select update.
• A historical database, which can be imported and analyzed in database or spreadsheet software, is maintained on all coupons used. The couponuz.dbf can be FTPd to your PC for further analysis in MS Access, MS Excel, or other data management software. This could be useful in determining which coupons bring you the most activity. The number of uses for each coupon is displayed in the admin table in Merchant 4.0
• New in the compiled version is the coupon usage report. You can summarize or list each coupon used for a specific time period. You can also restrict the output to a specific coupon code or a string of characters in a coupon code. This latter is useful when you have assigned a series of coupons to an affiliate or advertising campaign. You can determine how much business was brought in with the coupons from various sources.
• The compiled version of this module can use OpenTokens instead of hook points within OpenObjects. The OpenDesigner screen lists the OpenObjects which can replace all or some screens within the OpenUI user interface. The OpenObjects provide a template screen which contains the existing hook points (backward compatibility), OpenToken capability, and the ability to move output around within the OpenObject screen. Since the tokens in this module conform to OpenToken functionality, they may be used in other template type screens.

MMUI and OpenUI compatible. If you are using MMUI, there are two required edits in the mmui.mv. If using MMUI in a compiled version of Merchant (4.14 and newer), you will need to edit and recompile the mmui.mv (expensive proposition). Thus, with compiled Merchant, we recommend using OpenUI instead of the MMUI user interface.

Price: $35 Upgrade Cost: $25 Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions: 2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Coupon Modules
Relevance: 53.85%%

Rating: (8.00) Votes: (2) Hits: (3920) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Coupon Redemption <-- Just click this link and then add to your favorites!

12 Coupon Redemption v5 Emporium Plus / Miva Central

Features:- Configurable prompt - Configurable action - Configurable redemption - Configurable coupon rejection messages - Uses tokens to place input on pages - Searchable coupon database with pagination - Easy view admin for coupon content and historical usage - Coupon codes can be individually assigned - Import coupon codes from flat file in bulk - Autogenerate unique coupon codes with token - Assign coupon code as a series for affiliate purposes - Global scope or for specific products - Checkout coupons one per order - Instant coupons on product pages, multiple per order - Fixed amount or percentage of eligible products discounting - Specific product eligibility can be scoped to the attribute level - Minimum order level for redemption of checkout coupons - Establish expiration dates - Line item display in basket after redemption - Single use coupons - One per customer coupons - Multiuse coupons (can be limited) - Free shipping coupons - Limit the country, state or zip a coupon can be used for - Combination of free shipping and order discount (% or fixed) coupon - Easy deletion of expired coupons - Coupon report identifies coupon usage Feature Details. You can add coupons through the standard Miva Merchant admin interface and include usage criteria. An unlimited number of coupons can be assigned to the store and eachidentified with a coupon code. Once you have added the module to the store, you can add coupons in the Order Fulfillment section of the admininterface. When you select the Add icon, you will have several input fields to fill in. You must enter a unique code for your coupon. Thisis the code that you will give to customers so they can shop and redeemthe coupon. It can be any combination of letters and/or numbers. You canembed a token in your welcome email or notification emails generated with our Mail Manager (Emporium Plus - Weiland) module. A unique coupon code will be created and is based on the coupon template you designate. You can have an unlimited number of templates and an unlimited number of coupons copied from them. If you are not using our Mail Manager, you can still activate the generator by placing the token in the invoice header. If you are using our Tell A Friend (Emporium Plus - Weiland) module, you can embed the unique coupon code in the emails that customers send when referring their friends to your store. The coupon generation is also useful when it is embedded into the follow on contact emails that our Follow On Contact (Emporium Plus - Weiland) module sends out. If you have a lot of coupons you want to load into the system quickly,there is a coupon import from flat file module An optional expiration date can be included which will prevent its useif the date has passed. Enter it in the year, month, day format, eg. 20000724 would be July 24, 2000. If you leave this field blank the coupon will never expire. However, you can still delete it manually through the admin interface. A fixed value OR percentage discount off the order total is assigned to each coupon. The default is fixed value/price, e.g. $5.00 off the order total. If you put the % sign in the next input field AFTER the value field, it will calculate the coupon value based on the assigned percent of the order total. The %, if used, is entered in the separate field to the right for that purpose. If left blank, the calculation will be based on the fixed value of the coupon. See the note below about restricting discount calculations to specific products instead of the order total. A maximum redemptionvalue can be assigned to each coupon. Free shipping coupon option. If you enter the letter S in the field to the right of the value field, the coupon will be used to allow free shipping for the entire order. Other criteria for the coupon must be met, e.g. minimum order amount, eligible products, etc. Optionally, a coupon can be allowed only when an order total reaches a specific amount. For example, you can give a 10% discount when the order total reaches $200 as an incentive or promo. In all cases where a raw value is used, you must make this value equal to or greater than the value of the coupon. If you usethe percent calculation, this value can be any value, including zero. Based on your state's tax requirements, the coupon can be designated toreduce the sales tax or not reduce it. The coupon's tax effect is onthe order total, not on individual products. For example, in some states, a store coupon reduces the cumulative value of products purchased before the sales tax is applied, hence you would want it to reduce tax. The exception to doingthis is if your products are likely to be non-taxable, making a coupon reduce tax could result in a negative tax calculation. Another type coupon might be the manufacturer coupon. In some states, manufacturer coupons do not decrease the tax liability. You should determine your state's tax requirements before adding coupons to your store. Coupons can either be used: multiple times - The coupon can be used at every visit by any customer who shops at your store. This is usually used as a promo to customers,user lists, clubs, etc. They often have a short expiration date to limittheir use. A typical usage might be a special holiday sale, eg 10% offeverything in the store if used by a specified date. This would eliminatethe need for special price groups if the intent is that everybody who hasthe coupon code can use it. In the compiled version you can limit the number of times a multiple coupon is redeemed. only one time for each customer - The coupon can only be used for one visit per customer. When the same customer shops at your store a secondtime, if he/she uses the same coupon code, it will be rejected. This isprobably the most common coupon and is usually used in print ads or as a promo, eg. "$5.00 off on your next visit". only one time for a unique coupon code - The coupon can only be used once. Once any customer has used this code, it becomes unavailable for any other purchase. This is often used as a customer relations tool, e.g. "sorry for the inconvenience, please accept this coupon.....". Global or product related. You can restrict usage of a coupon in your store so that it can be used only if a specific product is ordered. You can list several product codes,any of which in the basket would make the coupon valid if the other requirements are met. Leaving the product code blank means that customers do not have to order a specific product as long as they meet the other requirements the store owner has specified. If you check the box to the left of the product code list, and are using the percentage discount, only those products in the code list will be used in the calculation using the qualifying products subtotal. If you do not check the box, the percentage discount will be applied against the order total. Youcan use a wildcard for the product list, e.g. 1AA* would make all productsbeginning with 1AA eligible for the coupon discount. Use instant coupons on the individual product pages and for specific products. These coupons are redeemed at the product page and instantly appear in the basket as a line item discount related to a specific product. Unlike the global checkout coupons, customers can redeem multiple instant coupons in a single order. From a marketing standpoint this gives the merchant the opportunity to offer a promo code atthe product level which gives an impending event (expiration of the promo)to encourage sales while not lowering the value of the product with an overtprice discount. You can restrict the coupon usage down to the attribute level. For example, you can limit the coupon to product codes beginning with 1AA and the attribute "Version" with the specific option value of "4.5". The format for the input would be 1AA*~Version~4.5| If you precede the product list with a - (minus) character,the coupon will be excluded from use with those products. You can limit the coupon to be used only if the customer is in a specific zone. You can use ONE of six possible zone limitations for each coupon (ship to: country, state or zip; bill to: country, state or zip). Appropriate error messages are displayed when coupons don't meet theusage criteria established by the store owner. When the shopper entersa coupon code that is not valid based on the criteria you establish, he/she will see an error message just below the coupon codeinput when the page is re-displayed. In admin, the coupons can be easily displayed and edited. The couponsare displayed in a table format with configurable number of coupons per page displayed. The entire coupon database is searchable by coupon code or beginning portion of the coupon code. Expired coupons can be removed from the database (to cut down on disk usage) one at a time or in mass. In admin, you can either put a checkin the remove column and select update or select purge expired coupons, then select update. A historical database, which can be imported and analyzed in database orspreadsheet software, is maintained on all coupons used. The couponuz.dbfcan be FTPd to your PC for further analysis in MS Access, MS Excel, or other data management software. This could be useful in determining which coupons bring you the most activity. The number of uses for each coupon is also displayed in the admin table. The coupon usage report module can provide historical data within your admin. You can summarize or list each coupon used for a specific time period. You can also restrict the output to a specific coupon code or a string of characters in a coupon code. This latter is useful when you have assigneda series of coupons to an affiliate or advertising campaign. You can determine how much business was brought in with the coupons from various sources. The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $45.00 Upgrade Cost: $0 Upgrade Terms (If Any): N/A Compatibility: N/A Versions: 5.x+ Other Module Compatibility: N/A From: Coupon Modules Relevance: 53.69%% Rating: (0) Votes: (0) Hits: (1543) Reviews: Rate It - Review It - Modify It - Report It Bookmark Coupon Redemption v5 <-- Just click this link and then add to your favorites! Back to Top 13 Sort Categories and Products Weiland / Miva Central The sorter module gives you the ability to sort your Miva Merchant categories and products very quickly from an easy to use, admin interface. The typical sort time for 700+ products is 1-2 seconds. In the latest version of the module, you can also capture the number of products in each category for quick lookup at runtime for use in the category tree or other Merchant pages. Features:(some features are only in the compiled version) - Sort categories by name, code or entry date - Sort products by name, code, price or entry date (ascending or descending) - Sort entire store or sort one category at a time - Sort products within categories by name, code, price or entry date (ascending or descending) - Categories do not all have to be sorted the same way - Move specific products to the top of the product list, search and category pages with a quick mass input - Display an image before the product name (openui hook point or token) for products with a sort order number lower than the trigger number established by the store owner - Count products in each category for later display (openui token) at runtime to reduce server load and page view time Feature Details. You can sort the categories by name, code, or entry date. Many stores find that their categories are best sorted by category code rather than category name. This way they can create codes which will put their categories in the order they want. While most may actually coincide with category names being alphabetical, stores can rearrange the categories to put things like "Specials" or "Close Out" at the top of bottom of the list. The customer does not see the category code, they only see the results of the sorted list. The products can be sorted by name, code, price, or entry date. The product sorting can be done either as either ascending or descending. Most stores will sort the products by name. The very quick sort is done storewide with one button click. The storewide sort results in the products being sorted in all of the category screens, the product list screen, and the search screen. Compiled version additional features: New in the compiled version for Merchant 4.14 and newer, you can sort the products within individual categories differently than the sorting in the store at large. So while the product list and most categories might be sorted alphabetically, you could have others sorted by price as ascending or descending. You can sort the products by a specific category and then on the next screen, make minor changes to re-arranged that sorting. This gives you the ability to move certain products to the top for more customer visibility. You can also list up to 999 product codes in the order you want them and they can appear before any other products on the product list, search and each category screen. This ability to assign a sort order number also makes it possible to display an image, e.g. new or hot, to all products with a sort order number less than the trigger you assign using OpenUI hook points or tokens. You can also elect to count the products in each category. If you do, the counts will be available at runtime in Merchant. By having the data in a quick lookup table, Merchant does not have to count the products in each category as it displays the category list in the category tree. It simply shows the previously stored totals. This option cannot be used in stores which use availability groups to hide products from some customers because the totals would show the amounts for all products in each category. The sorter module provides OpenUI hook points to display the products in category total after the category name. To use that option, your store needs to have the OpenUI installed. Alternatively, the module has a token which can be run by other 3rd party modules to report the products in category totals. That method may or may not require the OpenUI, depending on the module which is going to use the token. If you have OpenUI version 4.935 or newer, the Sort Categories and Products link appears in the upper admin menu under the Categories and Products headings. Price: $15 Upgrade Cost: $10 Upgrade Terms (If Any): N/A Compatibility: MMUI/OpenUI Versions: 4.x, 4.14-4.16x (Available Compiled) Other Module Compatibility: N/A From: Sorting Modules / Sort Categories and Products Modules Relevance: 52.64%% Rating: (0.00) Votes: (0) Hits: (1689) Reviews: Rate It - Review It - Modify It - Report It Bookmark Sort Categories and Products <-- Just click this link and then add to your favorites! Back to Top 14 Miva Merchant Tutorials Subscription Doubleplus New Media Marketing / Take a look over the shoulder of a Miva Merchant professional as he takes you through every step, every module (almost), every function. Complete with "live" comments unedited, you'll learn while feeling like you're sitting next to a Miva Guru. This tutorial subscription is different than all other Miva Merchant training methods because it is constantly updated, there are OpenUI and MMUI tutorials, as well as extensive tutorials on most popular third party modules, including offline products like Storeman. With the cooperation of third party developers, when a module is updated, or a new module is released, Merchant How To will create a new tutorial. Setting Up Your First Miva Merchant Store Getting Into Admin Adding a Product Adding a Category Global Headers/Footers, etc. Attribute Templates Edit Store Admin Tour Images The Nav Bar The Category Tree Upselling Related Products Availability Groups Price Groups Managing Customers Shipping Methods Payment Methods Order Processing Basic Maintenance Installing Modules Downloading and Installing Miva Mia Installing OpenUI Updating OpenUI OpenUI Tour OpenTokens Accounts/Login Creating a Mini Basket Adding a Second Store Adding OpenUI to Second Store Plus Third Party Modules and Software such as: Viking Coders Affiliate Manager Affiliate Login Gift Certificate Manager Category Page Templates Product Page Templates Other Page Templates Storefront Template Order Status Manager PayPal Web Accept Phone Order Manager Wish List Manager Search Manager Additional Screens Manager Buy X Get X Free Category Navigation Menu Coupon Manager Additional Product Fields Manager Top Sellers FedEx Advanced UPS Online Advanced Continue Shopping and Checkout PIN Fulfillment truXoft truXoft Software Delivery in Email Attachments truXoft Data Doctor truXoft Exit Message Interface for 3rd Party Extensions HTML Formatted Merchant Notification HTML Formatted Customer Confirmation truXoft P3P Privacy Policies Software / Content / Access Delivery Packing Slips for Ultra Batch MmTICKER · Mini Admin · Alerts · Task Scheduler · Backup Ultra Batch Report / Order Browser Vendor Notification Email Weiland - Emporium Plus Starter Kit Mail Manager NetBlazon Attribute Prompt in Basket Basket Tracker Extra Customer Fields Payment on Account Remember Me Zip Based Sales Tax Copernicus Address SuperMod Address & Shipping SuperBund Cascading Popup Menus Advanced Checkout SuperMod CustContact Dynamic Templates CustCredit Import/Export SuperMod Membership SuperMod Meta Tag Generator OpenUI SuperMod Order Attribute Order Fulfillment Kit Payment SuperMod Quantity Plus! Shipping Returns Processing Search Engine Tracker Search Friendly Links Search Friendly Store Map Shipping SuperMod Upload File Attributes Wump Subscribe2 - Opt in Mailing List Manager Subscribe2 to Merchant Integration Modules 4thebest.net QwkTracker QwkGuard QwkPatch QwkRed OpenUI™ Consortium OpenUI™ OpenStatistics™ OpenDesigner™ OpenModules™ OpenJoinList™ OpenAutoGroups™ OpenCurrency™ OpenOrderStatus™ OpenShipping™ OpenPayment™ OpenParentAccounts™ OpenPriceRefresh™ OpenInAndOut™ OpenMembers™ OpenBestPrice™ Plus Offline Tools such as: Stone Edge Order Manager PHOSPHOR Media StoreMan And more as it is released. Click the link to see examples of tutorials. NOTES: Please allow up to 24 hours for activation. Tutorial Flash files can be large, so it is recommended that you have a broadband Internet connection to enjoy the tutorials. This tutorial subscription is new, so not all tutorials listed at MerchantHowTo.com are immediately available. Also, since this subscription is essentially electronic distribution of knowledge, and since there are several examples and a list of tutorials available prior to purchase, no refunds can be granted on these tutorials. Price: $599.95 Upgrade Cost: $0 Upgrade Terms (If Any): N/A Compatibility: MMUI/TemplateUI/OpenUI Versions: 1.x, 2.x, 3.x, 4.x , 4.14-4.23x (Available Compiled) Other Module Compatibility: N/A From: Support Tutorials for Miva Merchant Relevance: 52.15%% Rating: (10.00) Votes: (1) Hits: (2039) Reviews: (2) Rate It - Review It - Modify It - Report It Bookmark Miva Merchant Tutorials Subscription <-- Just click this link and then add to your favorites! Back to Top 15. ShipWorks v5 - Powerful Shipping and Order Management Software What is ShopInvoice?   ShopInvoice is a powerful, easy-to-use, and affordable desktop application that greatly simplifies the day-to-day business of Miva Merchant users. From professionally printed invoices and packing slips to Internet postage and fully-integrated UPS shipping, labeling, and tracking features, ShopInvoice is the most versatile and innovative application available to Miva Merchant users today. Key Benefits Save countless hours on order fulfillment tasks Ship accurately and cost effectively Send shipping and tracking notifications Create a professional, lasting impression Seamlessly integrates with your Miva Merchant store. Read the overview and take the quick tour. ShipWorks Features Compatible Carts - eBay & eBay Stores - Marketworks - Miva Merchant - ShopSite - Yahoo! Stores Automatic Downloads - - Bulk downloading of rates and transit times.  - Bulk downloading and printing of live UPS labels. - Supports multiple packages, tokenized reference numbers, and Quantum View Notify. - Supports standard and thermal printers, multi-up label sheets, and combined invoice and labels. UPS WorldShip - Directly communicates with WorldShip; no manual import or export required. - Customizable tokenized reference numbers printed on labels. - Supports Quantum View Notify. - Automatically imports service used, shipment weight, total cost, and tracking number after processing. U.S.P.S. Label Download - Integrated directly with USPS for downloading live labels (without postage). - Perfect for business with their own postage meters. - Delivery confirmation is free for Priority Mail, and only $0.13 for First Class. Stamps.com - Directly communicates with the Stamps.com; no manual import or export required. - Supports stealth postage mode. - Customizable tokenized memo's printed on labels. - Address verification and correction. - Automatically imports tracking number after processing. Endicia DAZzle - Directly communicates with DAZzle; no manual import or export required. - Customizable tokenized rubber stamps printed on labels. - Automatically imports tracking number and total cost after processing. Shipment Creation - Shipment address pre-filled based on order shipping information. - Create multiple shipments, using multiple carries, for each order. - Product weights automatically downloaded. (eBay and Miva) - Customer-chosen shipping method automatically downloaded. (Yahoo! and Miva) - Quickly enter weights using zero-configuration scale support. Shipment Tracking - Integrated UPS and U.S.P.S. tracking for support personnel. - Send bulk email to customers with clickable tracking links. - Tracking numbers automatically imported and saved after processing shipments. Shipping Labels - Supports inkjet, laser, and thermal printers (such as Dymo and Eltron). - Print full page shipping labels, or multi-up sheets. - Print all-in-one forms that combine invoices\packing slips and the shipping label. - Print standard Avery (or any brand) address labels using customizable XSL and HTML. - SureSize™ technology ensures every address and graphic fits on every label. HTML Templates - Includes email, invoice, packing slip, reporting, and exporting templates. - Customizable, powerful, well-documented XSL template format. - Specify which printer (supports networked printers) and paper tray to which each template should print. - Powerful "conditions" can be embedded in templates. Invoices & Packing Slips - Plenty of royalty-free, customizable XSL templates (see the Gallery). - Print pick-lists for warehouse staff to efficiently pack shipments. Reports - See exactly what your customers are buying, and how much of it. - XSL template based, completely customizable. - Evaluate various aspects of your business. Generic Export - Customizable exporting of any data, to any format. - Export bulk data to .htm, .txt, or .csv. - Easily integrate with your existing software, such as MOM and Great Plains Accounting. Email - Integrated email with viewable history for each order and customer record. - Built-in WYSIWYG email editor. - Send email in bulk, with one click. - Send payment requests, shipping notifications, and clickable tracking numbers. - Send invoices, product announcements, and targeted advertisements. - Plenty of included, customizable XSL templates. - Ability pecify a specific email account each template should be sent with. Order Status - Customizable order status allows tracking each order through your business flow. - Use with filters to display a running count of how many orders are in each status. - Send emails to customers with order status updates. Add and Edit Orders - Add manual orders, such as orders taken by phone. - Add and edit order items, charge details, and notes. - Modify and correct order details when customers call in. Customer Service - "Quick Search" fields look up customers and order numbers instantly. - All order information, including notes, status, and tracking information are immediately visible. - Keep customers up-to-date with shipping and status notifications. - Incredible networking support keeps customer service reps and shipping stations constantly synchronized. Filtering and Searching - Customizable filters allow you to specify any search criteria you want. - Filter Panel shows each filter as a folder, with a count of matching orders. - Clicking the filter folder instantly displays the matching orders. - Pre-installed filters help you get started right away. Networking - Connect all computers to the same ShipWorks database. - Automatic, immediate synchronization yields efficient processes and reduced errors. - Manage customer service and shipping from different locations, while staying connected. - Easy installation and setup. Miva Merchant - Batches Panel shows all batches and how many orders in each batch. - Filter the order display by batch. - Automatically detects when orders are moved from batch to batch from Miva admin. - Create batches directly from ShipWorks. eBay Sellers - Leave eBay feedback in bulk with customized presets. - Sell all feedback that has been left for you by buyers. - Track checkout status and send bulk payment reminders. - Downloads eBay checkout data, as well as address information entered in PayPal. - Automatically updates your "My eBay" status after processing shipments. Configurable Interface - Customize grid column order, sort order, and which columns to display. - Detail panels show all selected order details at a glance, on one convenient screen. - Customize panel size, location, and visibility. - Customize toolbars and context-menus. Scale Support - Zero-configuration scale support for serial ports - plug it in, and it just works. - NCI model 7010S (also known as the Stamps.com scale). - Fairbanks scales. - Metler Toledo scales. - Salter Brecknell 7010SB. - Supports the scale models listed above that include a serial port. Administration - Simple setup and installation, no knowldege of databases required. - Easily backup and restore all ShipWorks data in a single click. - When setting up networked installations, the main database is automatically detected. Powerful Database - Microsoft SQL Desktop Engine (MSDE) provide free with purchase of ShipWorks. - Fast, efficient, and maintains data integrity. - Built on the same engine as MS SQL Server. More Info.... From: Order Management Applications and Modules Relevance: 1.00%% Rating: [Wes Clayton] Votes: [sales@interapptive.com] Hits: [8.00] | Dec 31, 209 16 Power Search v5 Emporium Plus / Miva Central The purpose of Power Search is to allow a customer to search one or more fields which are allowed by the store owner. The store owner can choose any fields within the products database and/or the custom product fields (Miva Corp built-in utility module) database to be searchable. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant. Features: - Implements field specific, keyword searching - Uses store morph technology to build templates with version history - Customer selects the fields to search and the sort order they want the results displayed - Search the whole store or limit to one category - Search by all (AND), any (OR), exact phrase, or begins with - Display total found, number of pages, and links to each page when the results exceed one page - Use the same product list layout as original search or alter for your needs - Can limit search to a specific price range - Use in conjunction with the Emporium Plus Tell A Friend module to send searches to a friend - Product page "return to search" link takes customers back to the same search page - View admin log of searched words/phrases for marketing and keyword identification - Maintain compatibility with 3rd party modules which use the MIVA Corp custom product fields - Create pre-defined select list searches on a single field - License per domain/mall Feature Details. Easily editable templates. The module has five templates which can be used for each section of the search page. The templates have full versionhistory and use standard Merchant 5 template coding for easy update and rollback of changes. Each template is pulled into the location you want it on the search page using a render token. The templates are field selection, category selection,search scope/type, page counter and links, and product list layout. Search specific fields and sort results. Allow a customer to search one or more fields which are made selectable by the store owner. The store owner can choose, in the admin screen, any fields within the products database or the MIVA Merchant built in custom product fields database to be available. The Power Search module uses a mirror database of your products, custom fields and categories; much like the big search engines use. By creating a mirror before the search is made, many operations to join multiple databases togethercan be avoided, so the customer gets a much faster search. Customers can also sort the results on fields like name, code, price, cost, when they were added to the store, or the default display order the store owner established for productlists. The build of the mirror database goes quite quickly and is a maintenance procedure you will do periodically. The small amount of time you take to build the mirror will save your customers significant amounts of time in their searches vs searches which don't use an optimized mirror database. Buildingthe mirror is not required just because products are added, deleted, or edited; as those processes update the mirror automatically without needing a rebuild. See the install doc for details. Category selectable. Customers can use the category selector to select just one category to search. The default is to search the whole store. You can use the built in token which lists all categories with one or more products in them oryou can build your own select list of only certain categories. Multiple search types. The customer can select how they want to search the database. The default is to search for products where all (boolean AND) of the keywords entered are found in the record. The customer can broaden that search so that any (boolean OR) of the words are found in the record. They can search by exact phrase so that the words must appear in thesame order in the record as was entered in the search input. They can also search the fields where the data in the field begins with the search string. This is useful for things like finding all of the products whose NAME begins with a specific letter and allows you to have a list of A-Z links that implement that specific search. Advanced pagination. The module can display the total number of products found which match the search condition. Additionally, the pagesare numbered, e.g. Page 3 of 20, when results exceed the configurable number of products per page. You can also display alist of page numbers and links to those pages so the customer can jump to the page they want to look at. This pagination is similar to that used in the Emporium Plus Category Manager module. Product layout template can be customized. In the 'srch' page template, there is a "search results layout". If you are happy with that layout, you can copy and paste the contents of that template into the Power Search module's product layout template. You can then modify the layout in the Power Search admin screen. Price range searching. While searching the price field might be useful in some cases, a more popular search is price range. Within the searchable fields section, the customer has the option of entering a low and high price to create a range. If left blank, the search will not be filtered by price range. Tell a friend module interface. If the store is using the Emporium Plus Tell A Friend module, customers can send the search string from Power Search to friends. The link in the email will go to the same page of products that the customer was on when they clicked the Tell A Friend button. Return to search page link. After going to the product page from a Power Search rendered search, a convenient "return to search" link on the product page can bring the customer back to the original search page. Search log with admin report. In admin, you can view the log of search words/phrases which your customers have used. This helps you from a marketing standpoint to determine the most sought after products and possibly the need to carry a new product. Additionally, it helps you identify keywords which might be useful to include in the narrative descriptions or the meta tags for search engine submissions and even local searches in your store. As example, while you might have a product called flip flops, customers might be searching for thong sandals (which is the same thing). But if you had not used those words in your description, you may have lost the sale. The log can be purged in the admin screen to reduce its size as desired. Optimized search of built-in custom product fields. This module does not require that you use a proprietary 3rd party module for the custom product fields. It uses the built-in custom product fields module from MIVA Corp, thereby ensuring compatibility with other 3rd party modules which use those same custom product fields. No need to go down that proprietary datafield path of no return. As example, the Emporium Plus Template Data Feed module can use the built-in custom product fields to populate feeds to just about any search engine and shopping index with those "special" fields those indexes require. Live examples. We cannot link to our demo Merchant 5 store from MivaCentral so if you'd like to see a couple of the live pages demonstrating searches, please contact us for the link. You can check out the selected field search in our test store which has about 600 products with multiple custom product fields. Try some searches so you can get an idea of search speed. Pre-defined selectors. The Power Search function can also be used for pre-defined select pulldowns in your store. An example of genre and decade searches are in the lower left column of our test store's storefront screen. It will search a specific field, with store owner pre-defined selections. This same technique can be used for things like manufacturer searches if you have a manufacturer field in your custom product fields. Liberal licensing. License is for ONE domain/mall. Within that single mall, it can be used in multiple stores without additional licenses. This module requires that you are using MIVA Engine v5.03 or newer. When you log into admin, you can see which version of the engine is in use in your store. Searchable field configuration Template editor with version history Customer viewed search screen Token placement on the srch page template Power Search log review in admin screen Price: $35.00 Upgrade Cost: $0 Upgrade Terms (If Any): N/A Compatibility: N/A Versions: 5.x+ Other Module Compatibility: N/A From: Store Search Modules Relevance: 50.28%% Rating: (0) Votes: (0) Hits: (1708) Reviews: Rate It - Review It - Modify It - Report It Bookmark Power Search v5 <-- Just click this link and then add to your favorites! Back to Top 17 MmDbDOC truXoft / Miva Central MmDbDOC - truXoft Data Doctor and Miva Database Editor MmDbDOC is a tool for testing and repairing corrupted databases and database indexes. It allows you to remove duplicate records from any Merchant or non-Merchant database quickly and without downloading or importing them, directly through the Miva Merchant Admin web interface. There are three different ways of the duplicate records repair: manual selection - you can select which of the duplicate records you keep, and remove the remaining one(s) manual editing - you can edit the duplicates so that you keep several or all of them in the database but change the unique identifier field(s) so that the duplicate key in the index is avoided fully automated - MmDbDOC will automatically remove all duplicate records from the selected database, keeping always the first found record in the duplicate set MmDbDOC can be also used for viewing databases. This feature is invaluable for quick database verification, for retrieving data not accessible through Miva Merchant Admin (i.e. customer passwords, module settings, basket data, affiliate data, ...). Please note: We recommend viewing the raw databases containing sensitive data (passwords, email addresses, payment data) in secure mode only (SSL / https). The PRO version includes a full featured database editor for modifying any Miva Merchant or 3rd party database tables. Fields may be quickly modified without downloading or exporting any data. New records may be added or old ones deleted. You can duplicate whole blocks of records with a simple click and edit them afterwards. Main Features version DEMO Standard PRO Merchant databases yes yes yes 3rd party databases yes yes yes database list limited yes yes database information yes yes yes index expression retrieval yes yes yes dupe locator yes yes yes database browser limited yes yes database viewer limited yes yes manual duplicates repair no yes yes editing duplicate records no yes yes automated repair no yes yes index error parser no yes yes editing records no no yes deleting records no no yes adding/cloning records no no yes database packing no no yes Please note: truXoft Ultra Batch is required for the full functionality of the standard or PRO versions. The free version of Ultra Batch that comes with MmDbDOC, allows you to see maximally up to three records at a time. Support truXoft offers limited free support within 30 days after the purchase of the module. Issues not included in the free support: Information about the structure of Miva Merchant databases Information about individual database tables or the database fields Information about relations between individual Miva Merchant database tables Help with repairing or editing of databases Any other issues not directly related to MmDbDOC Important note: The database editor in the PRO version was designed for advanced users who understand the basic structure of Miva Merchant databases. MmDbDOC allows you to edit the raw data, but makes no verification of the data you added, modified or removed. If multiple tables are in a relation, it is the user who has to insure to edit all related tables appropriately to avoid breaking the cross table links. Unqualified editing of the databases may corrupt the store. We highly recommend backing up the entire domain and store data before removing duplicate records (repair) or before editing the databases. truXoft bears absolutely no liability in case of loss of data, corrupted databases or a broken Miva Merchant store. If any such case should occur, please restore the original data from the backup. After repairing or editing any database, you have to pack both domain and store data in Admin! Instructions Installation instrucitons may be found in the readme.txt included in the distribution package. After registering your license key, in Ultra Batch (Xadmin) screen in the main frame of Miva Merchant Admin, click on the tab "databases", select the mode "database list" and click the OK button. Ultra Batch will show you the list of all pre-defined databases. If a corrupted database with duplicate records is detected, the "Repair" button appears right in the line of the concerned database. By clicking it, you access the repair interface and see the first found set of duplicate records. You can either: select the record you want to keep (click "KEEP Selected"), or edit the records to avoid the duplicate key (edit the fields with light blue background so that the resulting key is different at each record) and click the button "Keep multiple" or let MmDbDOC repair the database unattended (click "Automated Repair") In case of manual repair, as described above in 1) and 2), you have to repeat the operation with each duplicate set individually. Normally, you should use the default mode of Ultra Batch hiding deleted records - select "standard" in the first small dropdown box in the right part of the Ultra Batch control panel. In case you use the mode "all", you'll have to navigate through the duplicate sets with the help of the navigation buttons right below the Ultra Batch control panel. The navigation buttons can be used also when you want to preview all duplicate sets before starting to repair them. Please note that the filter expression (top left) and pagination (top right) of Ultra Batch have influence on the MmDbDOC output. When low numbers are selected in the pagination in sake of faster page loads, use the navigation buttons to proceed to the next page. It applies also for the database list, not only for the repair and edit interface of MmDbDOC. Before starting to repair or edit databases with MmDbDOC, it is recommended to put the store into maintenance mode. Use the first button (the lock) in the Ultra Batch panel to close and re-open the store. We also highly recommend to back up the entire Miva Data directory containing the databases, before performing any operation on the data with MmDbDOC. If you experience a runtime error in the store front or Admin, where the message speaks about a database index, copy the message, and after opening the mode "parse error" in the "databases" tab of Ultra Batch, paste the error into the displayed field. MmDbDOC will look up the databases and launch the repair interface. In case you need to repair a database not listed, you can select the "3rd party dB" mode and enter the database and index paths manually to start the repair function. Database viewer (demo and standard versions), or the database editor (PRO version) can be launched by clicking the requested database alias in the database list. IMPORTANT: after repairing or editing any database, you have to pack both domain and store data in Admin! Compatibility Any UI (MMUI, OUI, KCUI,...) Miva Merchant v4.14 or higher Miva Empresa v4.07 or higher MSIE 6 recommended for the Administration interface of truXoft modules Compatibility with OpenXB stores was not yet tested Price: $39.95 Pro Version $99.95 Upgrade Cost: $0 Upgrade Terms (If Any): N/A Compatibility: MMUI/OpenUI Versions: 4.14-4.23x (Available Compiled All 4.x Versions) Other Module Compatibility: N/A From: Administrative Modules Relevance: 50.04%% Rating: (7.00) Votes: (0) Hits: (1634) Reviews: Rate It - Review It - Modify It - Report It Bookmark MmDbDOC <-- Just click this link and then add to your favorites! Back to Top 18 Sort Categories and Products v5 Emporium Plus / Miva Central The sorter module gives you the ability to sort your Miva Merchant categories and products very quickly from an easy to use, admin interface. The typical sort time for700+ products is 1-2 seconds. In the latest version of the module, you can also capture the number of products in each category for quick lookup at runtime for use in the category tree or other Merchant pages. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant. Features: - Sort categories by name, code or entry date - Sort products by name, code, price or entry date (ascending or descending) - Sort entire store or sort one category at a time - Sort products within categories by name, code, price or entry date (ascending or descending) - Categories do not all have to be sorted the same way - Move specific products to the top of the product list, search and category pages with a quick mass input - Display an image before the product name for products with a sort order number lower than the trigger number established by the store owner - Count products in each category for later display at runtime to reduce server load and page view time Feature Details. You can sort the categories by name, code, or entry date. Many stores find that their categories are best sorted by category code rather thancategory name. This way they can create codes which will put their categoriesin the order they want. While most may actually coincide with category namesbeing alphabetical, stores can rearrange the categories to put things like "Specials"or "Close Out" at the top of bottom of the list. The customer does not see the category code, they only see the results of the sorted list. The products can be sorted by name, code, price, or entry date. The product sorting can be done either as either ascending or descending. Moststores will sort the products by name. The very quick sort is done storewide with a couple button clicks. The storewide sort results in the products being sorted in all of the category screens, the product list screen, and the search screen. You can sort the products within individual categories differently than the sorting in the store at large. So while the product list and most categories might be sorted alphabetically, you could have others sorted by price as ascending or descending. You can sort theproducts by a specific category and then on the next screen, make minor changes to re-arranged that sorting. This gives you the ability to move certain products to thetop for more customer visibility. You can also move to the top of the list up to 999 product codes in the orderyou want them. They can appear before any other products on the product list, search and each category screen. This ability to assign a sort order number also makes it possible to display an image, e.g. new or hot, to all products with a sort order number less than the trigger you assign using a token. You can also elect to count the products in each category. If you do, the counts willbe available at runtime in Merchant. By having the data in a quick lookup table, Merchant does not have to count the products in each category as it displays the category list in a 3rd party module's category tree. It simply shows the previously stored totals. This option cannot be used in stores which use availability groups to hide products fromsome customers because the totals would show the amounts for all products in eachcategory. The sorter module uses a token to display the products-in-category total after the category name if you are using a 3rd party category tree template module. The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $27.95 Upgrade Cost: $0 Upgrade Terms (If Any): N/A Compatibility: N/A Versions: 5.x+ Other Module Compatibility: N/A From: Sorting Modules / Sort Categories and Products Modules Relevance: 49.96%% Rating: (0) Votes: (0) Hits: (1024) Reviews: Rate It - Review It - Modify It - Report It Bookmark Sort Categories and Products v5 <-- Just click this link and then add to your favorites! Back to Top 19 Tell A Friend Weiland / Miva Central Provide an easy interface for visitors to refer your site URL to their friends. It uses the Miva SMTP capability. The subject and body of the Tell a Friend email message is configurable through the Merchant admin interface. The form colors and fonts that the customer sees is also configurable in admin. You can choose to have a blind CC sent to the store email address and a log entry (date, from, to, product code - if applicable) maintained in a flat file when referrals are sent. If the customer sends the referral email when they are on a specific product screen, a second link to the product is included in the email. In Merchant 4.x and if you are using our Gift - Wish List module, there is a convenient button on the bottom of the Gift List display that sends the Gift List URL to your friends. The module is MMUI and OpenUI compatible. If using the MMUI, two edits are required in the mmui.mv. With MMUI, you can place the button just about anywhere on the screen that you want it, the most common location being at the bottom of the category column. With the OpenUI, you can select through admin among the eight possible locations. New in the compiled version is compatibility interface with the OpenUI Tokens and Viking Coders product template module. Place the Tell-a-Friend button on the product page so that it better fits your desired look. Also, new in the compiled version is the ability to send the search string to a friend if your store is also using our Power Search module. Clicking the link will reproduce the search the original friend had created with Power Search prior to sending the Tell-a-Friend email. In the compiled version, you can use this module with the standard MMUI, as mmui.mv edits are not required in Merchant versions 4.14 and newer. New in the compiled version is an alternate template form for the customer to enter friend names and email addresses, plus an option to allow them to include a note. This template can be HTML customized to suit your look and feel. If you are not skilled at coding HTML, you can still use the default (built in) form which is customized with colors, fonts, etc with easy inputs in admin. New in the compiled version is the ability to embed certain tokens in the tell a friend email. For example, if you are using our Coupon Redemption module with its unique coupon code generation feature you can insert a token like %module|couponrd|1~TELL-% in the body of the email. If you are on a product page when you send the email, the email can also contain the product name, image or thumbnail, and price by using tokens. Also, new in the compiled version is the ability to send the email as HTML formatted instead of plain text. New in the compiled version is the ability to send the search string to a friend if your store is also using our Power Search module. Clicking the link will reproduce the search the original friend had created with Power Search prior to sending the Tell-a-Friend email. This is similar to the link you can send for the Gift/Wish list if you are using our Gift List module. The compiled version of this module can use OpenTokens instead of hook points within OpenObjects. The OpenDesigner screen lists the OpenObjects which can replace all or some screens within the OpenUI user interface. The OpenObjects provide a template screen which contains the existing hook points (backward compatibility), OpenToken capability, and the ability to move output around within the OpenObject screen. Since the tokens in this module conform to OpenToken functionality, they may be used in other template type screens like those provided by Viking Coders. Place the Tell-a-Friend button on the Merchant pages so that it better fits your desired look. Price: $20 Upgrade Cost: $10 Upgrade Terms (If Any): N/A Compatibility: MMUI/OpenUI Versions: 2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled) Other Module Compatibility: N/A From: Share Tell A Friend Modules Relevance: 49.23%% Rating: (0.00) Votes: (0) Hits: (2361) Reviews: Rate It - Review It - Modify It - Report It Bookmark Tell A Friend <-- Just click this link and then add to your favorites! Back to Top 20 My Favorites Quicklist v5 Advanced Development Solutions / Miva Central Give your customers bettercontrol of their shopping experience. This module provides a way forthem to save their favorite items, with selected attribute options, tothe Favorites QuickList. Products can be added to Favorites QuickListfrom Product, Category, Search, Product List pages or the Entire Basketcan be saved, to checkout later. This provides a quick and easy was toorder their favorite or frequently bought items, without having to browse thestore or search for them, all from one screen. The Favorites list canbe sorted by code, title or price, and quickly modified using provided controls.Store developers and managers have complete control over thelook and feel of My Favorites QuickList layout using the automaticallyinstalled, Store Morph Technology™ templates. Thismodule is ideal for busy and wholesale stores. The ADS My FavoritesQuickList Features: Simple ModuleInstallation, Configuration and Controls Automaticcreation, installation and item assignmentof My Favorites Default Page and ProductList Layout templates and settings. Automaticinstallation and assignment of My Favoritespage required items. Automatic modificationof existing page and layout templates. Allyou need to do is insert a text or graphicallink to My Favorites QuickList anywhere in yoursite navigation. Moduleprovides complete design control of My FavoritesPage usingthe new Store Morph Technology™ basedtemplates. Neverworry about making template changes. Moduleutilizes new version history control. Twosample templates are automatically installedfor the My Favorites Product List layout.Thetemplates can be further modified to meetyour needs. Just add a link to My Favorites QuickList anywherein your template and you are ready to go. Notemplate editing required, but is availablefor advanced users. HTML and template scriptingknowledge is required to make template modifications.If you do not have these skills it is recommendedyou contactADS representative to get assistancewith template design and customization. Enhanced User InterfaceFeatures and Controls. Since Customersare required to be logged in to use thisfeature, they are automatically taken tothe Account Login screen if they click onMy Favorites navigation link or try to additems to their Favorites. Customers can save their entire basket to Favorites fromthe basket screen. Product and Attribute/Optioninformation is also saved. Add individual items to Favorites from Product,Category, Search and Product List pages.Product and Attribute/Option informationis also saved. Quickly add multiple selected items, with attributes,and quantities to Basket with just one click. Quickly delete multiple selected items from Favoriteswith just one click. Breadcrumb Navigation for My Favorites QuickList. Product Pagination with Product Totals, PageNumber Links and Previous/Next buttons. Productspagination is controlled through merchant admininterface. Quick Favorites product sorting by Product Code,Name or Price in ascending or descending order. Samplesnap shot of My Favorites Quick list page layout and controls: Samplesnap shot of Product Page with Add to Favorites button: Samplesnap shot of Basket page with Save to My Favorites button: Samplesnap shot of a My Favorites Page Template administration Screen: Samplesnap shot of a My Favorites Product List Layout Template administrationScreen: Module installationand functionality has the following requirements: MIVA Merchant Version5.0 No template editingis required, but is available for advanced users. HTML and templatescripting knowledge is required to make template modifications. Ifyou do not have these skills it is recommended you contactADS representative to get assistance with template design andcustomization. Price: $139.95 Upgrade Cost: $0 Upgrade Terms (If Any): N/A Compatibility: N/A Versions: 5.x+ Other Module Compatibility: N/A From: Gift Wish Favorites List Modules Relevance: 48.99%% Rating: (0.00) Votes: (0) Hits: (1857) Reviews: Rate It - Review It - Modify It - Report It Bookmark My Favorites Quicklist v5 <-- Just click this link and then add to your favorites! Back to Top Next Page » Pages: [1] 2 3 4 5 6 7 >> Back to Top | Add Module | Newest Modules | Most Popular Modules | Modify Listing Miva Merchant Modules Home - Miva Merchant Hosting - Miva Merchant Developers - Miva Merchant Help Miva Conference © Copyright 2003 JMH Web Services, Inc.  All Rights Reserved. Miva, Miva Engine, Miva Empressa, Miva Mia, Miva Merchant, and the Miva Corp. Blade Logo are trademarks of Miva Corporation, developer of the best ecommerce shopping cart software.